The bigger the well pressure tank, the more water you can store. So, considering the air and unused water storage inside the tank, the volume of a tank should be at least four times its drawdown capacity. In addition, there should always be some water left inside the tank to maintain the minimum pressure point, which is 30psi in the case of tanks with 30/50psi pressure switch. Only ⅓ of pressure tanks actually hold water the rest is reserved for the air that’s responsible for producing pressure. You shouldn’t confuse tank drawdown with tank volume. In this scenario, the volume of water that can be drawn from the tank when its water pressure goes from 50psi down to 30psi is the pressure tank drawdown. Once the pressure reaches 30psi, the pump will reactivate until it climbs back up to 50psi.There will be no water incoming to the tank until the pressure hits 30psi. The water pressure gradually decreases to 30psi as you use the stored water.The water pressure is at 50psi (pounds per square inch) when the tank is full, so the pressure switch turns off.Here’s an example of the action of a well pressure tank with a 30/50 pressure switch: ![]() In other words, it’s the amount of water the pressure tank can store and/or deliver between the time the pump shuts off and restarts. Need quick help? Our -> local plumber search tool <- will help you find professional handymen near you in minutes! What is a Well Pressure Tank Drawdown?Ī pressure tank drawdown is the amount of water that the tank stores and makes available when the pressure switch is off.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |